Pro Red Oxide Primer

Metal | Protection | Primer

Pro Red Oxide Primer is a solvent-based, anti-corrosive primer designed for interior and exterior metal surfaces, including ferrous and non-ferrous metals. It provides excellent resistance to abrasion and weather, making it suitable for light to moderate industrial and marine environments. This primer ensures a strong protective layer over steel, zinc, galvanized iron, and pre-treated aluminum. Available in a reddish-brown color, it features low VOC content and resistance to mild chemical attack.

PRO RED OXIDE PRIMER

INTENDED USES

Pro Red Oxide Primer is recommended for all types of interior and exterior metal surfaces.

FEATURES

Corrosion Resistant
Low Volatile Organic Content
Resistant to Mild Chemical Attack
Excellent Resistance to Abrasion
Solvent-Based Alkyd
Reddish-Brown Color and Low Gloss Finish

LIMITATIONS

Drying time may vary depending on weather and drying conditions.

SURFACE PREPARATION AND APPLICATION

Appropriate and good surface preparation significantly increases the topcoat life and durability. Deploy skilled/experienced individuals for the application of paint. A few general instructions are given below:

New or Bare Surfaces:
The surface to be painted must be dry, clean, and free from all contamination. Remove dirt, grease, and waxy material. Scuff with suitable sandpaper, dust off, and apply Pro Red Oxide Primer.
Previously Painted Surfaces:
Scrape off all the loosely adherent paint from the surface with an appropriate abrasive paper. Make the defective area smooth using sandpaper and apply a coat of Pro Red Oxide Primer.

RECOMMENDED PAINT SYSTEM FOR METAL SUBSTRATES

Sequence	Recommended Product	No. of Coats
Primer	Pro Red Oxide Primer	1
Finish	Pro Top Coat*	2-3

*Pro Paints offers a wide range of topcoats, including Synthetic Enamel, Matt Enamel, Aluminum Paints, Hammer Finish, etc. Choose the right product according to your style.

HEALTH AND SAFETY NOTES

When applying paint, wear appropriate eye protection.
In case of eye contact, rinse with plenty of water for at least 10 minutes.
Avoid inhaling spray mist or dust.
Ensure proper ventilation when applying paint.
Do not use the empty container for storing edibles.
Keep out of reach of children.
Pregnant women should avoid exposure to paint mist or spray.
In case of an emergency, seek medical supervision immediately.

WARNING

Scraping or sanding off previously painted surfaces may release lead dust or fumes. Lead is highly toxic; take thorough protective measures when rubbing off old surfaces.

DISCLAIMER

The information provided in this data sheet is accurate and authentic to the best of our knowledge and based on standard tests. However, results may vary due to possible variations in field conditions and application procedures.