Eco-Friendly
Safe formulations that are gentle on the environment.
Vibrant Colors
A wide palette to enhance your space’s beauty.
Easy Application
User-friendly products for smooth application.
Durability
Designed to withstand harsh conditions for lasting protection.
Intended Uses
Pro Dimensions Matt is ideal for all types of interior masonry surfaces such as brickwork, plaster, cement rendering, and wallboards.
Features
- Good hiding power
- Excellent color retention
- Excellent coverage
- Eco-friendly
Product Information
- Appearance: Matt Finish
- Colour: Wide range of ready-mix colors
- Binder Type: PVA copolymer
- Pigment Type: Light Fast Non-Lead Pigments
- Application: Brush, Roller, and Spray
- Flash Point: Not Applicable
Cleaning: Clean all equipment with water immediately after use.
Thinning: 30% to 35% thinning ratio.
Coverage: 12-14 m²/Liter/coat (Actual spreading rate depends on film thickness, surface porosity, temperature, and wastage).
Specific Gravity: 1.56 ± 0.02
Volume Solids (Theoretical): 38 ± 2% for Brilliant White (other colors may vary)
No. of Coats: 2-3 coats
Film Thickness: Wet: 80-90 µm / coat | Dry: 30-35 µm / coat
Packing: 3.64 and 14.56 Liters
Drying Information
| Temperature | Touch Dry | Hard Dry | Recoat |
|---|---|---|---|
| 5°C | 6 hrs | 12 hrs | 12 hrs |
| 15°C | 2 hrs | 6 hrs | 6 hrs |
| 25°C | 1 hr | 3 hrs | 3 hrs |
| 35°C | 0.5 hrs | 1.5 hrs | 1.5 hrs |
Drying and recoat times depend on temperature, humidity, and film thickness.
Surface Preparation and Application
Proper surface preparation significantly increases the topcoat life and durability. Efflorescence or mold must be treated before application of paint. Deploy skilled/experienced individuals for the application.
New or Bare Surfaces:
Allow new concrete or mortar to cure for 8-12 weeks based on thickness and drying conditions. Ensure the surface is dry, clean, and free from contamination. Apply one coat of Pro Plaster Primer and two to three coats of Pro Wall Skim. Scuff and dust off the surface before applying one coat of Pro Plaster Primer, followed by Pro Dimensions Matt.Previously Painted Sound Surfaces:
Remove all loosely adherent and defective paint. Spot prime with Pro Plaster Primer, and fill surface imperfections with Pro Wall Skim. Scuff and dust off the surface before finishing with Pro Dimensions Matt.Powdery, Cracked, and Defective Surfaces:
Fill large defects with a sand and cement mixture. Remove dirt, grease, and poorly adhering materials. Prepare the surface as described above for new or bare surfaces.
Finishing:
Apply 2-3 coats of Pro Dimensions Matt. Ensure 1-2 hours of drying between coats. Follow the recommended thinning ratio. Stir thoroughly before use.
Recommended Paint System
Surface Type: New or Bare Surfaces
- Primer: Pro Plaster Primer | Putty: Pro Wall Skim | Primer: Pro Plaster Primer | Finish Coat: Pro Dimensions Matt
Surface Type: Previously Painted Sound Surfaces
- Finish Coat: Pro Dimensions Matt (No primer or putty required)
Surface Type: Powdery, Cracked, and Defective Surfaces
- Primer: Pro Plaster Primer | Putty: Pro Wall Skim | Primer: Pro Plaster Primer | Finish Coat: Pro Dimensions Matt
Note: Scraping or sanding previously painted surfaces may release hazardous dust or fumes. Take protective measures thoroughly when working on old surfaces.
Reviews
There are no reviews yet.