Eco-Friendly
Safe formulations that are gentle on the environment.
Vibrant Colors
A wide palette to enhance your space’s beauty.
Easy Application
User-friendly products for smooth application.
Durability
Designed to withstand harsh conditions for lasting protection.
Intended Uses
Pro Synthetic Enamel is designed for use on various surfaces, including wood, metal, and masonry. It is highly suitable for spaces such as kitchens and bathrooms, providing durability and maintaining an excellent finish with proper primer application.
Features
- Lasting, deep gloss finish
- Superior flow and leveling
- Resistance to mild chemical exposure and abrasion
- Air-drying with a smooth final finish
- High color retention
Limitations
- Drying time may be affected by environmental conditions.
- Ensure the appropriate primer and/or sealers are used for optimal performance.
Product Information
- Color Range: Available in various shades (refer to shade card).
- Binder Type: Solvent-based alkyd
- Pigment Type: Titanium dioxide
- Volume Solids: 42 ± 2%
- Viscosity: 2300 ± 2 cP
- Specific Gravity: 0.970 ± 0.02
- Application Methods: Brush, roller, or spray
- Finish: Gloss
- Thinner: Mineral turpentine (thinning up to 25% as needed)
- Coverage: 13–14 m² per liter per coat
- Packing: 0.25 L, 0.91 L, 3.64 L, and 14.56 L
- Storage Temperature: 4–30°C
Drying and Recoat Times
| Temperature | Surface Dry | Hard Dry | Recoat |
|---|---|---|---|
| 5°C | 3 hours | 24 hours | 16 hours |
| 15°C | 2 hours | 24 hours | 16 hours |
| 25°C | 2 hours | 24 hours | 16 hours |
| 35°C | 2 hours | 24 hours | 16 hours |
Note: Drying and recoat times are dependent on temperature, humidity, and film thickness.
Surface Preparation and Application
Proper surface preparation enhances the longevity and performance of Pro Synthetic Enamel. Skilled application is recommended.
New or Bare Surfaces:
- Clean surfaces, removing contaminants, and scuff with sandpaper.
- Apply Pro Red Oxide Primer or Pro Zinc Chromate Primer to metal surfaces to prevent rust; Pro Undercoat to wood surfaces.
- Allow to dry, then apply 2 coats of Pro Synthetic Enamel.
Previously Painted Surfaces:
- Remove loose paint and contaminants; prime with Pro Red Oxide Primer (metal) or Pro Undercoat (wood) as needed.
- Allow to dry completely and apply 2 coats of Pro Synthetic Enamel.
Recommended Paint System
| Substrate | Primer | Finish | No. of Coats |
|---|---|---|---|
| Metal | Pro Red Oxide or Pro Zinc Chromate Primer | Pro Synthetic Enamel | 2-3 |
| Wood | Pro Undercoat | Pro Synthetic Enamel | 2-3 |
| Masonry | Pro Wall Primer Sealer | Pro Synthetic Enamel | 2-3 |
Health & Safety
- Protective Gear: Use appropriate eye, skin, and respiratory protection during application.
- Ventilation: Ensure proper ventilation in the application area.
- Avoid Inhalation: Prolonged inhalation of paint mist may cause health risks.
- First Aid: If swallowed, contact medical services immediately. For eye contact, rinse with water for 10 minutes.
- Disposal: Do not reuse containers for food storage. Dispose of responsibly.
- Warning: Sanding older surfaces may release toxic lead dust; ensure safety measures are in place.
This technical information is based on standard tests and believed to be accurate. Field conditions may impact results, and Pro Paints disclaims liability for variations in results.
Reviews
There are no reviews yet.