Eco-Friendly
Safe formulations that are gentle on the environment.
Vibrant Colors
A wide palette to enhance your space’s beauty.
Easy Application
User-friendly products for smooth application.
Durability
Designed to withstand harsh conditions for lasting protection.
Intended Uses:
Pro Mica Guard is recommended for all types of exterior masonry surfaces such as brickwork, plaster, and cement rendering.
Features:
- Resistant to normal levels of atmospheric humidity.
- Excellent durability and color fastness.
- High coverage.
- Low VOCs (Volatile Organic Compounds).
Product Information:
- Appearance: Matt Finish
- Color: Wide range of ready-mix colors
- Binder Type: Acrylic copolymer
- Pigment Type: Lightfast, non-lead pigments
- Application Methods: Brush, Roller, Spray
- Flash Point: Not Applicable
- Cleaning: Clean all equipment with clean water immediately after use
- Thinning: 25–30%
- Coverage: 12–14 m² per liter per coat (actual coverage depends on film thickness applied, surface porosity, temperature, wastage, etc.)
- Specific Gravity: 1.50 ± 0.02
- Volume Solids (Theoretical): 40 ± 2% for Brilliant White (varies with other colors)
- Number of Coats: 2-3
- Film Thickness:
- Wet: 85–90 µm / coat
- Dry: 30–35 µm / coat
- Packing: Available in 1, 4, and 16 Liters
Drying Information:
| Temperature | Touch Dry | Hard Dry | Recoat |
|---|---|---|---|
| 5°C | 12 hrs | 24 hrs | 24 hrs |
| 15°C | 6 hrs | 12 hrs | 12 hrs |
| 25°C | 2 hrs | 6 hrs | 6 hrs |
| 35°C | 1 hr | 3 hrs | 3 hrs |
Drying and recoat times are dependent on temperature, humidity, and film thickness.
Surface Preparation and Application:
Appropriate surface preparation significantly increases topcoat life and durability. Efflorescence or mold must be treated before paint application. Deploy skilled individuals for paint application.
1. New or Bare Surfaces:
- Allow new concrete, mortar, or cement render to cure for 8–12 weeks.
- Ensure the surface is dry, clean, and free from contamination.
- Remove dirt, grease, and wax by rubbing down with abrasive paper.
- Apply one coat of Pro Plaster Primer and two coats of Pro Wall Skim. For extra smoothness, apply a third coat of Pro Wall Skim.
- Allow the surface to dry completely, scuff with abrasive paper, and dust off.
- Apply 2-3 coats of Pro Mica Guard.
2. Previously Painted Surfaces:
- Remove all loosely adherent and defective paint using abrasive paper or a stiff brush.
- Spot prime with Pro Plaster Primer and fill imperfections with Pro Wall Skim.
- Allow the surface to dry completely. Scuff with abrasive paper and dust off.
3. Powdery, Cracked, or Defective Surfaces:
- Make good minor defects. Fill large holes and cracks with a sand and cement mixture.
- Clean and dry the surface thoroughly. Follow the same steps as for new or bare surfaces.
Finishing:
- After surface preparation, apply 2-3 coats of Pro Mica Guard. Ensure 1-2 hours of drying between coats.
- Stir thoroughly before use.
Recommended Paint System:
Consult a Pro Paints representative for the best-suited system for the intended surface.
Surface Type & Recommended Treatment:
| Surface Type | Primer | Putty | Finish Coat |
|---|---|---|---|
| New or Bare Surfaces | 1 coat of Pro Plaster Primer | 2-3 coats of Pro Wall Skim | 2-3 coats of Pro Mica Guard |
| Previously Painted, Sound Surfaces | Not Required | Not Required | 2-3 coats of Pro Mica Guard |
| Powdery, Cracked, Defective Surfaces | 1 coat of Pro Plaster Primer | 2-3 coats of Pro Wall Skim | 2-3 coats of Pro Mica Guard |
Warning: Scraping or sanding previously painted surfaces may release hazardous dust or fumes, which can be toxic. Take appropriate safety measures.
Reviews
There are no reviews yet.